Measure more with less 

Moku:Lab is a reconfigurable hardware platform that combines the digital signal processing power of an FPGA with versatile analog inputs and outputs. This simplifies your workflow by giving you access to 12 high-performance instruments that enable you to measure what you need when you need.

Available instruments

Features 

Versatile analog front-end

Moku:Lab’s analog front-end is designed for maximum versatility. Its two 500 MSa/s inputs can be configured for AC or DC coupling, 50 Ω or 1 MΩ impedance and an input voltage range of 1 Vpp or 10 Vpp. Moku:Lab also features two 1 GSa/s outputs with 300 MHz anti-aliasing filters, allowing you to generate two high-precision waveforms while measuring on its inputs.

Precision timing

Moku:Lab features an ultra-stable internal oscillator with better than 500 ppb accuracy, 

as well as 10 MHz input and output references for synchronization with external timebases.

External trigger

Moku:Lab features a dedicated DC to 5 MHz external trigger input designe

d for TTL (1.8 to 5 Volts) voltages. Some instruments use Moku:Lab’s analog inputs as high-precision external triggers, 

giving you more control over your system’s trigger settings.

Freedom in the lab

With Moku:Lab, you’re not tethered to your equipment. 

Control your experiment wirelessly and move freely throughout the lab with your measurements at your side. 

wifi: Connect Moku:Lab to an existing WiFi network or configure it to create its own wireless network.